Home / Application / Smart card / Contactless cards
Antenna printing
- Conductive adhesives for active and passive components
- Contact printing in 3D MID area
- Thick-film pastes for screen printing
- UV-curing products for RFID
Product recommendation:
Elecolit® | 3043 | 414 |
Typical applications
| Antenna
printing,
ceramic fuses | Flexible
conductive paths
on film |
Base | 1K- epoxy | 1K- Polyester |
Viscosity (mPas) | 4000-5000 | 20000-25000 |
Curing | 10 min/150°C | 5 min /150°C |
Temperat.resist.(ºC) | -40/+180 | -55/+200 |
Contact resistance ohm x cm | 0,015 | 0,0005 |
Eigenschaft | Very low
viscosity, good
dispensability,
small fillers
Ag<10 μ,
low ion content | Extremely flexible,
very good
conductivity,
can be kinked
and crumpled,
abrasion-proof |
Antenna contacting
- Viscous, solvent-free conductive adhesives with silver filler
- Short curing times at low temperatures
- Conductive pastes with excellent filling properties
Product recommendation:
Elecolit® | 3061 | 3063 |
Typical applications
| LCD, flexible
circuits | Flexible
component
bonds |
Base | 1K- epoxy | 1K-UV-acrylate |
Viscosity (mPas) | 35000-45000 | thixotropic |
Curing | 10 sec./150°C | 1 min./200mW/ cm2+ 40N |
Temperat.resist.(ºC) | -40/+180 | -40/+150 |
Contact resistance ohm x cm | 0,0001 | 0,001 |
Characteristics | Anisotropic
electrically
conductive,
ion pureness
< 10 ppm | Anisotropic, UVcuring,
for transparent
film with
printed conductive
paths, highly
flexible |
Brochures
Vitralit® UV- and light-curing adhesives
